CEMEX Supaflo
Cemex Supaflo - Flowing Screed Choice
I’m Andy Parkin, Managing Director of the Multi-Award Winning Speed Screed, and I’m here to talk about CEMEX Supaflo
GENERAL OVERVIEW
CEMEX Supaflo is a calcium sulphate based flowing screed.
APPLICATIONS
Perfect for:
Residential/Commercial/Retail/Healthcare buildings
Schools
Floating, bonded and un-bonded construction
Incorporation of electric or wet underfloor heating systems
Timber, concrete and steel frame
Supaflo is not suitable for:
Permanently wet areas, such as commercial changing rooms/swimming pool surrounds
Areas that require falls
MIXING/SUPPLY
CEMEX Supaflo is supplied directly from the screed manufacturer. Supplied in ready-mixed truck mixers. 4/6/8/10 wheelers.
The screed is then discharged into a specialist screed pump and then pumped into place.
DRYING TIMES
Approximately 1mm per day, up to 40mm. Beyond 40mm, 0.5mm per day. This is based on 20 degrees and 60 relative humidity
After 7 days the screed can be forced dried to speed up the process.
FOOT TRAFFIC
24-48 hours
SCREED DEPTHS
Bonded 25mm
Unbonded 30mm
Floating 35mm Domestic
40mm Commercial Acoustic 80kg @ 40mm
Coverage over underfloor heating pipes 30mm
***it should be noted that those depths are based on the standard mix, and other options are available.
SCREED SUPERPOWERS
Up to 2000m2 per day productivity
Joints at 30-40 linear meters
Very low shrinkage
Minimal cracking
Will not curl
No need for curing membrane
No reinforcement required
Requires no manual compaction
Eco-friendly calcium sulphate binder
Free from protein and does not harbour harmful bacteria.
With nearly twice the thermal conductivity of traditional sand and cement screeds, Supaflo is perfect for underfloor heating.
Feel free to contact us for further information about CEMEX Supaflo.
#screed #speedscreed #floorscreeding #cemex #flowingscreed #supaflo
Comments
Post a Comment